FAI

7000

Owner's Manual

FEATURES AND OPERATION:

1. TRANSMITTER: BUTTON #1

1.1 DOOR LOCK:

Press button (1) on the transmitter to lock the doors. The siren will chirp once and lights flash once, LED flashes rapidly and 2 seconds later flashes slowly.

1.2 DOOR UNLOCK:

Under the arm mode, press button (1), siren will chirp twice, lights flash twice, doors unlock.

1.3 Panic: (by optional set up).

The purpose of applying the panic mode is to warn away intruders or people who try to close the car and threaten you.

Under any mode, press button (1) for 2 seconds, the system will enter into the arm mode. Lights flash and siren sounds until the alarm times up.

1.4 Auto Re-arm:

After disarm the alarm system press button (1), if the car owner does not get in the vehicle within 30 sec., the alarm will reset itself and enter the arm mode.

2. TRANSMITTER: BUTTON #2

2.1 Channel 2 output:

Under the arm mode, press button (2) once, channel 2 will be on for 0.5 second. Shock sensor will be bypassed for 8 sec.

Under the disarm mode, press button (2) once, channel 2 will be on for 0.5 sec.

3. TRANSMITTER: BUTTON #3

3.1 Car Search:

Under the arm mode, press button (3) once, lights flash for 30 seconds (by optional set up) and return to the arm mode after the alarm cycle ends.

Under the disarm mode, press button (3) once, will enter into the arm mode, lights flashing 30 seconds (by optional set up) and remains in the arm mode after the alarm cycle ends.

3.2 Remote Anti-Hijack:

The purpose of applying the remote anti-hijack mode is to prevent car stolen. Once owners found their cars are just stolen and the thief is driving it away, owners can use this mode, the siren will be on one minute later, and also the engine will be stopped.

While the ignition is on, press button (3) once, LED & lights keep flashing to warn intruder: While the ignition is off, lights will flash until the end of the set-up alarm cycle then enter into the arm mode.

4. TRANSMITTER: BUTTON #1 & #2 SIMULTANEOUSLY

4.1 Mute Arm mode:

Under the disarm mode, press button (1)+(2) simultaneously once, lights flash once, and press button (1) again within 1 second, lights will flash once and doors lock. Then will enter into the mute mode.

Under the mute mode: if shock sensors are triggered, only the lights will flash. And if the ignition, doors or hood are triggered, then siren will sound and lights flash, and also the mute mode will be released.

4.2 Valet Mode:

Under the disarm mode, switch the ignition on and press button (1)+(2) simultaneously once, lights will flash once. Press button (1)+(2) simultaneously once more within 2 seconds, siren will chirp once to confirm into the valet mode. Under the valet mode, can use button (1) to control door lock and unlock, and lights will flash once or twice.

Switch the ignition on and then press button (1)+(2) simultaneously, lights flash once. Press (1)+(2) simultaneously once more within 2 seconds, siren will chirp twice and the system quits the valet mode.

4.3 Channel 3 output:

Under any mode, press button (1)+(2) simultaneously once, lights flash once, press button (2) once again within 1 second, siren chirps & lights flash once each, channel 3 will on for output. Apply same way to turn off the channel 3 and siren chirps & lights flash twice each.

5. TRANSMITTER: BUTTON #2 & #3 SIMULTANEOUSLY

5.1 Trunk Release:

Under the arm mode, press button (2)+(3) simultaneously once, trunk will be opened.

Under the disarm mode, press button (2)+(3) simultaneously once, trunk will be opened.

6. OTHER FEATURES AND OPERATIONS

6.1 Alarm Mode:
  1. If any installed sensors are triggered, the system will be into the alarm mode. Except the alarm is triggered by the first stage of the shock sensor, the siren will chirp 3 times to warn intruder.
  2. If the ignition is triggered, the system will be directly into the alarm mode until switch the ignition off and the siren cycle is off (by optional set up).
  3. If doors, trunk or hood are opened, the siren will sound and stop after 4 cycles (by optional set up), also sensors will be bypassed until door, trunk or hood is closed.
  4. If the alarm is triggered, press button (1) once, siren will chirp once and doors lock.
6.2 Program Feature: LCD Transmitter Function:
  1. Rear lights: Press button (4) to turn on rear lights that will last for 3 seconds.
  2. Battery saving mode: Under the disarm mode, press button (2)+(4) simultaneously, transmitter chirps once to confirm this function. After 70 seconds, transmitter will enter into sleeping mode (LCD display off); Press any keys to wake up (LCD display On)
  3. Vibration function: Under any mode, press button (3)+(4) simultaneously to choice ON/OFF.
26.11.2003