FAI

8000

Owner's Manual

FEATURES AND OPERATION:

1. TRANSMITTER: BUTTON #1

1.1 DOOR LOCK:

Press button (1) on the transmitter to lock the doors. The siren will chirp once and lights flash once, the engine killer is on, LED flashes rapidly and 5 seconds later flashes slowly.

1.2 Remote Panic:

The purpose of applying the remote panic mode is to warn away intruders or people who try to close the car and threaten you.

  1. Under the arm mode, press button (1) over 2 seconds, siren will be on and lights flash. Siren and lights will be off after 60 seconds.
  2. Under the disarm mode, press button (1) over 2 seconds, siren will be on and lights flash. Siren and lights will be off after 60 seconds. After 30-second fast flash in LED, siren chirps once, start kills is on and enter into the arm mode.
  3. Under the panic mode, press button (1) and will release the panic mode.
1.3 Remote Anti-Hijack:

The purpose of applying the remote anti-hijack mode is to prevent car stolen. Once owners found their cars are just stolen and the thief is driving it away, owners can use this mode, the siren will be on one minute later, and also the engine will be stopped.

While the ignition is on (driving status) under the disarm mode, press button (1) over 2 seconds and lights will flash. One minute later, siren will be on, start kill is on and the doors lock, lights keep flashing then enter into the remote anti-hijack status. Pressing button (1) once can release the remote anti-hijack status.

1.4 Car (Silent) Searching:

Under the arm mode, press button (1) once, siren will sound a long chirp and lights flash once

2. TRANSMITTER: BUTTON #2

2.1 DISARMING:

Under the arm mode, press button (2) once, the siren will chirp twice, the lights flash twice, the doors unlock, start kill is off and, LED flashes rapidly for 30 seconds.

2.2 Keyless Entry Mode:

The keyless entry mode is applied when car owners want to get off the car temporarily and don't want to switch the ignition off. Applying this mode can lock the doors but the engine will keep running.

Under the disarm mode, switch the ignition on, press button (2) once after 3 seconds, door unlock can be controlled. Pressing button (1) once more can control door lock.

2.3 Remote Trunk Release:

Under the arm mode, press button (2) over two seconds, truck will be opened and lights flash twice.

3. TRANSMITTER: BUTTON #3

3.1 Remote Engine Starting:

Car owners can apply this function to start engines without entering cars and switching the ignition on by keys.

  1. Start Once Mode: (Applied for diesel engines)

    *Press button (3) once, siren will chirp once, the lights flash once and the ignition are on. Seven seconds later, the engine will start and keep running for 6 minutes.

    *If the handbrake is off, can't start the engine, siren will chirp twice.

  2. Continuous Mode

    *Press button (3) once, siren will chirp once, the ignition are on, and lights flash once then flash twice later. Then the engine will start and keep running for 6 minutes.

    *While igniting, if the system doesn't receive the signals of charger (-) or starter solenoid (-), the engine start will be failed. There will be five times of automatic igniting actions.

    *If handbrake is off, can't start the engine, siren will chirp twice.

  3. 6 minutes after the engine start, the engine will be stopped, siren will chirp for 3 seconds.
  4. After the engine starts, press button (3) once, the lights will flash and the engine will be stopped.
  5. Start igniting actions under the arm mode:

    *When door sensor and pin sensor are triggered, igniting actions will be cancelled, the lights will flash and siren chirps.

    *Press button (2), doors will be unlocked. Pressing button (1) can only control door lock and button (2) can only control unlock but doesn't have trigger alarm functions, and igniting actions remain.

4. TRANSMITTER: BUTTON #1 & 2 SIMULTANEOUSLY

4.1 Valet Mode:

The valet mode is applied to disarm starter kill in case of transmitters lost or for vehicle servicing.

Under the disarm mode, switch the ignition on and press button (1)+(2) simultaneously once, lights will flash once. Press button (1)+(2) simultaneously once more within 2 seconds, siren will chirp once and LED is on then the system enters into the valet mode. Under the valet mode, only can use button (1) to control door lock and button (2) to control unlock.

Switch the ignition on and then press button (1)+(2) simultaneously once, lights flash once. Press (1)+(2) simultaneously once more within 2 seconds, siren will chirp once and the system quits the valet mode.

5. OTHER FEATURES AND OPERATIONS

5.1 Alarm Mode:
  1. Shock sensors are triggered: If the first stage sensor is triggered, siren will sound for 2 seconds. If the second stage sensor is triggered, siren will sound for 30 seconds as well as lights flash. After 30 seconds, LED flashes rapidly for 5 seconds and later flashes slowly in the arm status still.
  2. Door sensor, ignition or pin sensor is triggered: Siren will sound on for 60 seconds and the lights flash. Then LED flashes rapidly for 5 seconds and later flashes slowly in the arm status still.
  3. The alarm is triggered: press button (1) or (2) once, siren will be off. LED flashes rapidly for 5 seconds and then flashes slowly in the arm status still.
28.11.2003